Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Surly Rear Rack Lower Kit
$28.00
All the hardware for the lower portion of your Surly rear rack. Stainless steel.
BiKASE Bungee Net
$9.99
The Bungee net is 12?x12? with 4 heavy duty hooks. Made with very durable shock cord material.
Sunlite Gold Tec Strut Kit
$7.99 - $10.59
- Hardware included - Fits all Sunlite Gold-Tec racks - Cut to length
Surly Big Dummy Rail Collars
$33.50
Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.
Topeak DP Mount
$23.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Axiom Trekk Seat Collar - 29.8
$13.00
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum
Ortlieb Inserts for QL2.1 Top Hooks
$6.00
If you've worn out your plastic inserts on the top hooks of your QL2.1-equipped Ortlieb bag, good job! That means you're using your gear a lot. To freshen up that sweet mounting system, here are new inserts for three different rack tube diameters. Each set has 2 inserts to fit each of: 8mm, 10mm, and 12mm racks rails. Each set is enough to set up one Ortlieb pannier for any of these diameters.
Sunlite Bungie Rack Straps
$12.00
• 24-inch long double strap • Vinyl-coated hook ends
Ortlieb QL3/QL3.1 Mounting Set for Rear Rack
$24.00
Replace your damaged Ortlieb QL3/3.1 rack hardware or grab another set to make it easy to mount your bag on more than one bike. Note that this is the part of the mounting system that attaches to the rack.
Sunlite Basket Parts
$2.99
- Mount: Bracket only
Ortlieb Mapcase for Ultimate (with Clips) – F1402
$30.00
If you like to use good old-fashioned maps on your bike tours, then the waterproof map case with roll-Velcro closure will be a welcome accessory for your Ortlieb Ultimate handlebar bag. Use the attachment set to attach your map case to your Ultimate bag in seconds. You can even turn and fold the map. And when you've reached your destination, you can continue to use the map to chart your course no matter what the weather. - Waterproof map case with cord fixing and roll Velcro closure - Attachable to handlebar bags Ultimate6 (4 point fixing with cord) - Transparent front and back made of tear and UV resistant PU-foil - Can be folded and used on both sides - Can be worn as map case around the neck e.g. for walking - Mapcase can be fixed with extra Velcro around bar stem - Not compatible with models Ultimate5 and older - Usable interior dimensions: 10.6 x 10.6 in (27 x 27 cm)
Specialized Thru-Axle Rack Mount
$30.00
Add a rack to your frame, even if you don’t have rack mounts. This innovative design allows a standard rack to be bolted directly to the thru-axle for a clean and simple look. It's made from lightweight aluminum to keep weight down and durability high, and it features threads inside of the axle to install the lower mounting bolts. - 12x148mm axle fits all carbon and alloy Specialized mountain bike frames with Boost rear hub spacing.
Surly Dummy Bag Snap Hook Strap Assembly
$5.00
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
Surly Petite Porteur Bag Liner
$24.00 - $28.00
Designed for use in the Surly Petite Porteur House. Neon color to make it easier to find objects inside a dark bag. - Urethane coated, water-resistant nylon stuff sacks - Drawstring closure
Surly Rear Rack Upper Kit
$35.00
All the hardware for the upper portion of your Surly rear rack. Stainless steel.
Surly Front Mid-Blade Mount Kit
$8.00
Front Rack mid-blade adaptor kit.
Thule Pack n' Pedal Rail Extender Kit
$9.95
Thule's Pack 'n Pedal Rail Extender Kit increases rider heel clearance by moving your panniers further back. The extenders can be used on either a front- or rear-mounted Thule Tour Rack (sold separately).
evoc BTB PRO STABILIZERS SET
$25.00
- Replacement stabilizers set for Bike Travel Bag Pro
Trek 1120 Rear Bikepacking Harness System
$79.99
Keep the adventure rolling on your Trek 1120 with a fresh new rear harness system. - Original equipment replacement rear harness system for Trek 1120 bikes - Replacement strap system to attach a bag to the Trek 1120 rear rack - For best fitment, an 8L dry bag is recommended-
Jandd Disc Brake/Fender Adaptors
$13.95
These handy adapters are for mounting a rack on bikes where clearance is needed for disc brake calipers or other accessories. - Screw them into the same holes on the dropouts for rack or fender bolts - Made from special hardened aluminum stock with a threaded steel insert - Best when only torqued to the same degree as rack bolts - Pegs are about .75" long - Can be used single sided or double sided - Sold in Pairs
Tubus Stay Clamp Set for Cargo/Logo
$11.00
Tubus strut clamp set for attaching and adjusting front stays on Cargo and Logo rear racks. - Aluminum block with stainless steel hardware - Fits 8mm diameter stays
Burley Travoy Rain Cover
$49.99
This rain-resistant cover for the Travoy pulls over and around your cargo, securing to the trailer frame. When not in use, it packs inside a convenient storage sack with a zippered pocket that remains attached to the frame ready for easy deployment when wet weather hits. Features: - Coated 70D nylon fabric keeps cargo dry - High viz fabric with reflective detail to keep you safe while you ride - Draw string tensions fabric around cargo - Center strap with buckle wraps around back for a secure fit - Velcro frame mount for cover storage sack - Compatibility: 2010 – Current Travoy - Weight (lbs/kg): 0.31 / 0.14
BiKASE Pet Cover for DairyMan Basket
$29.99
The Pet Cover for the DairyMan Rear Basket will certainly be the perfect pet carrier for your bicycle. The Pet Cover easily attaches to the DairyMan Rear Basket using a drawstring. It also has a full zip opening so you can easily put in and take out your small pet. The top of the Pet Cover is made with a mesh material for breathability and constant air flow. Most importantly, the Pet Cover comes with a bottom pad for your pet to have a comfy ride! Size: 15? x 13? (fits most baskets of this size) We have designed this basket to be fit perfectly with the DairyMan Rear Basket by BiKASE (p/n 1055) - 8? tall - Made of Nylon and EVA - Reflective logo - Mesh cover for breathability - Includes bottom pad
Delta Elasto Net
$17.00
A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size
Jandd Mono-Stay Rack Adaptor
$10.00
Jandd Mono-Stay Rack Adaptor is used for bikes that have a wishbone-style configuration on the rear end.
Salsa EXP Series 35.0 Anything Cradle Arms
$60.00
The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter. - Compatible with 35.0mm bars or 31.8mm bars (with included shims) - Compatible with all Salsa EXP Series Anything Cradles - Hinged clamps allow for easy installation and removal from handlebars - Made of 6061 forged aluminum
Sunlite Ramblin-Rod Replacement Rod Holder
$15.99
- Replacement/Additional rod holders for use with the Sunlite Ramblin Rod Holder Racks - Adds an additional rod holder for a total of 2 per rack - Not compatible with standard racks - Type: Add on Color: Black - Compatibility: Sunlite Ramblin Rod Racks
Green Guru ID Card Wallet
$14.00
The simple card wallet keeps your ID visible with a window and two pockets for keeping credit cards organized. Get rid of the lump in your back pocket to make sitting more comfortable, reduce back strain, and foil pickpockets. Made of upcycled bicycle inner tubes, it stretches to hold all you can put in it and returns to its original size when emptied. Materials: - Up-cycled Bicycle Inner Tubes - Up-cycled Clear Vinyl Window - Dimensions: 2.5 H x 4 W x 0.5 D in./63.5 x 101.6 x 12.7 mm - Weight: 1 oz/28 g Features: - Slim design for cards and cash - Clear identification card window - Two main card slots - Built in Colorado - Made in the USA - Limited Lifetime Warranty
Delta Waterproof Elasto Tarp
$15.99
- Expands up to 2x size to securely grip any shape - Weatherproof material will not deteriorate - Molded non scratch hooks
Dimension Seatstay Rack Clamps
$8.00
Dimension Bicycle Mounted Rack Parts - Sold as a pair - For 14mm-16mm seat stays - Nuts and bolts included - Plastic coated for secure attachment to frames without braze-ons