Filter By:
Parts & Accessories

$29.95
This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions.
- Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside
- Includes: plastic cage, Allen key, screws and washers
- Fits and encloses up to an average 20oz bottle and has enough room for a heat pack
- Extended zipper pull for easy open close while riding with winter gloves
- Reflective material on logo

$11.99
BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access.
• Material: POM head, PP bracket, Stainless steel hardware
• Size: 8cm x 6cm x 2cm
• Weight: 40 g
• Fits handlebar 24mm-32mm
• Versatile bracket rotates

$15.99
Mount any water bottle cage using our Cage Strap Adapter to any diameter of 3.25" or less. This will allow you to mount a water bottle in all kinds of different areas on your bike—you choose what is best for you! The extra-wide length can be cut to your desired length. The Adapter won't move around because it has a rubber base and compresses on your frame when mounted.

$45.00
Update or replace your lumbar reservoir. This 2-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 70-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking.
- 2L / 70 oz Dakine x Hydrapak 3D lumbar reservoir
- Blaster high-flow bite valve w/shut-off
- Quick-disconnect tubing for easier refills
- Molded 3D bottom provides better shape inside the pack
- Molded 3D bottom for much better drying between rides

$17.50
Bottle cage support for fitting on frames that don’t have specific fixing holes, or to increase the standard number of bottle cages.
Compatible with tubes having diameter from 25 mm to 70 mm (from 1 to 2.8 inch)

$4.99
- Customize your race belt with this lightweight slide on accessory
- Holds up to four gel packs
- Compatible with all Ergo & Ultralight Belts

$4.99
- Customize your race belt with our removable micro race locks with quick release clasp
- Fully adjustable race bib toggles
- Hi-viz reflective accents
- Compatible with all Ergo & Ultralight Belts

$9.50
- Individually packaged
- Enables mounting of a bottle cage in a variety of positions
- Fits 22.2-26.0mm handlebars

$25.00
Increase your hydration capacity with Origin-8's HydroRail Double Seat Bracket. This bracket mounts to your saddle rails and holds two bottle cages. And, the angle is fully adjstable so you can customize it to keep your bottles within easy reach. Bottles and cages sold separately.

$12.00
Adapter for direct mounting of the Fuel Pack or other equipment with screw connections.
Are you planning to mount the Fuel-Pack or a bottle holder on your bike but find the threaded holes are not in the right place? The Offset-Plate 64 MM gives you a flexible way of adjusting the position of the Fuel-Pack, a bottle holder or other equipment with screw connections.

$6.95
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

$7.95
Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.

$9.00
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

$9.95
Show your love for bicycles, tools and all things Park Tool with their Coffee Mug. Perfect for impressing your guests with a cool-logo cup, or fueling yourself before a fun wrenching session, a few of these mugs should be in every kitchen cabinet and bicycle workshop, too!

$10.00
On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage.
-45mm of adjustability
-28 oz water bottles max
-Constructed of AL-6061

$17.99
- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars
- Compatible with handlebars from 22mm to 36mm

$14.00
Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options.
- Fits tubes 20 - 60mm
- Engineering grade polymer
- Max load: 1.5 kg / 3.31 lb
- 26 g / 0.92 oz (2 pcs)

$17.95
Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump.
- Material: Engineering grade plastic
- Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge
- Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I
- Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3”
- Weight: 30 grams / 1.06 oz
*Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included

$24.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

$59.95
Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs.
- Material: Pressed aluminum
- Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails
- Hydration Capacity: One or two bottles (up to 750cc each)
- Max Load: 2.5 kg / 5.5 lb
- Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage
- Added Feature: 2 angle positions
- Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7”
- Weight: 97 grams

- Perfect finishing touch to a bike built
- 7075-T6 aluminum
- M5 x 15mm
- 4Nm max torque
- For water bottle cages only.
- Never use these aluminum bolts in a structural application.

$5.95
Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!

$10.95
XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

$15.50
XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

$36.95
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts.
- Adjustment Width: 75-150mm
- Construction (Plate): 6061-T6 Aluminum
- Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip
- Weight: 1.9oz (55g)

$44.95
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.

$69.95
Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts.
- Adjustment Width: 75-150mm
- Construction (Plate): 16-layer unidirectional carbon fiber
- Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip
- Weight: 1.9oz (55g)
Page 1 of 2
Next page