Rigid

$149.99
The Hurricane features P² Post Production heat-treatment for superior strength. Our one-piece, spiral-fluted (Vortex) steerer reduces weight without decreasing strength. The 31.6/1.4/1.1mm tapered legs are fluted as well, making these the strongest forks we've made to date. Top it off with our new, investment-cast 6mm-thick dropouts and you've got a fork you can trust to hold up to any style of riding. Vortex top cap included.
- Height: 314mm
- Steerer Tube Length: 172mm
- Bearing Race: Machined/Integrated
- Offset: 28mm
- Compression Bolt: 24 x 1.5mm
- Compression Bolt Tool: 6mm allen key
- Colors: Matte Black
- Weight: 36.2-ounces

$40.00 - $69.99
- Cantilever brake mounts
- 45mm rake
- Hi-tensile steel construction
- Steerer Type: Threaded
- Steerer Size: 1-inch
- Brake Mount: Cantilever
- Rake: 45mm
- Axle-to-Crown: 405mm
- Thread Length: 120mm
- Axle: QR 9mm

$45.00
- Brake mounts: Caliper
- Construction: Hi-tensile steel
- Rake: 50mm
- Type: LW
- Steerer type: Threaded
- Race diameter: 27mm
- Axle: 3/8'inch

$45.99 - $49.99
• Caliper brake mounts
• 35mm rake
• High-tensile steel construction
• 1-inch steerer diameter
• 185mm steerer length
• Threaded fork
• Compatible with 20-inch wheels

$49.99
- Hi-tensile steel construction
- Caliper brake mount
- 35mm rake
- Axle-to-Crown: 365mm
- Race Diameter: 27mm
- Axle: 3/8-inch
- Thread Length: 120mm
- Steerer Length: 200mm
- Steerer Size: 1-inch

$49.99
- Hi-tensile steel construction
- Caliper brake mount
- 35mm rake
- Steerer Type: Threaded
- Steerer Size: 1-inch
- Steerer Length: 200mm
- Brake Mount: Caliper
- Axle-to-Crown: 395mm
- Race Diameter: 27mm
- Axle: 3/8-inch
- Thread Length: 100mm

$49.99
Economically priced hi-tensile steel MTB fork for 26-inch wheels.
- Steerer Type: Threaded Steerer
- Size: 1" (7/8 ID)
- Steerer Length: 198mm
- Rake: 45mm
- Axle-to-Crown: 393mm
- Race Diameter: 27mm
- Axle: 3/8"
- Thread Length: 95mm

$49.99
- Hi-tensile steel construction
- Caliper brake mount
- 35mm rake
- Steerer Type: Threaded
- Steerer Size: 1-inch
- Steerer Length: 137mm
- Brake Mount: Caliper
- Rake: 35mm
- Axle-to-Crown: 315mm
- Race Diameter: 27mm
- Axle: 3/8-inch
- Thread Length: 40mm

$59.99
- Hi-tensile steel construction
- Available with brake studs or without
- 60mm rake
- Type: Cruiser Size: 26"
- Steerer Type: Threaded Steerer
- Steerer Length: 250mm
- Axle-to-Crown: 400mm
- Axle: 3/8"
- Thread Length: 125mm
- O.L.D.: 100mm

$59.99
• Cantilever brake mounts
• High-tensile steel construction
• Threaded fork
• Steerer diameter: 1-inch
• Steerer length: 200mm

$59.99 - $65.99
• Cantilever brake mounts
• High-tensile steel construction
• Threaded fork
• Steerer diameter: 1-inch
• Steerer length: 200mm
• For bikes with 26-inch wheels

$69.99 - $79.99
• Cantilever brake mounts
• 45mm rake
• High-tensile steel construction
• Threaded fork

$71.39
• Cantilever brake mounts
• Chromoly construction
• Threadless fork
• For 26-inch wheels
• 250mm steerer length
• 1 1/8-inch steerer diameter

$75.00
• Cantilever brake mounts
• 45mm rake
• Chromoly construction
• 1 1/8-inch steerer diameter
• Threadless fork

$79.99 - $89.99
• Caliper brake mounts
• 385mm axle-to-crown
• Chromoly construction
• 1-inch steerer diameter
• Threaded fork

$89.99 - $99.99
• Caliper brake mounts
• 45mm rake
• Chromoly construction
• Threadless fork
• 300mm steerer length

$98.99
• Chromoly construction
• V-brake mounts
• Fits bikes with 16-inch wheels
• Steerer length: 250mm

$99.99
- Hi-Tensile steel construction
- 135mm fat tire front hub spacing
- Steerer Type: Threadless
- Steerer Size: 1-1/8-inch
- Steerer Length: 275mm
- Brake Mount: Is Disc
- Rake: 45mm
- Axle-to-Crown: 450mm
- Race Diameter: 30mm
- Axle: QR 9mm

$99.99
• Cantilever brake mounts
• Chromoly construction
• Threaded fork
• For 26-inch wheels
• 200mm steerer length

$99.99
• Cantilever brake mounts
• 45mm rake
• Chromoly construction
• 1-inch steerer diameter
• 250mm steerer length
• Threaded fork

$109.99
• Cantilever brake mounts
• 45mm rake
• Chromoly construction
• 1-inch steerer diameter
• 200mm steerer length
• Threaded fork

$109.99 - $139.99
- Replacement urban threadless forks
- Accepts up to 40mm tire width
- Chromoly construction
- 1-1/8" steer tube
- Size: 700C
- Steerer Type: Threadless
- Steerer Length: 300mm
- Material: Chromoly
- Offset: 45mm
- Axle-to-Crown: 405mm
- Race Diameter: 30mm
- Axle: QR

$125.00
This beaut here was designed alongside our Midnight Special Frame. In an effort to shed a few grams (it's for a road bike after all), we opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice—don't you think? Now, we don't throw the phrase "future-proof" around lightly, so we won't use it here either. What we will say is that, like the Midnight Special Frame, this fork is equipped with modern road standards like flat mount disc brakes and a 100mm x 12mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!).
- Axle-to-crown: 400mm
- Steerer: 350mm, 1-1/8" straight
- Tire Clearance: 27.5" x 2.32" or 700c x 42mm (27.5 x 1.95" or 700c x 38mm w/fenders)
- Weight: 1254g

$130.00
The Bridge Club fork is designed around the 27.5 wheel size with tire clearance up to 2.8", but is also capable of running 700c wheel setups with max tire clearance of 47c. It has 51mm I.S. disc caliper mounts and brake line guides as well. It only has the barnacles that matter most to the discerning bike tourist.
- Upper and lower barrel bosses
- One set of three pack mount on each leg
- Mid-blade eyelets
- Lower rack and fender mounts on the fork ends
- Max tire clearance up to 2.8”

$130.00
Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat.
- Axle-to-crown: 400mm
- Offset: 44mm
- Steerer: 300mm
- Tire Clearance: 700c x 45mm
- Weight: 2.3 lb (1.0kg) uncut

$130.00
The ECR fork is much like the Ogre fork. Both are CroMoly 29er forks. Both work with frames designed for 80mm-travel suspension forks. Both feature 51mm I.S. disc caliper mounts, brake line guides, accommodations for a rack and fender, and 2 sets of cage mounts (one on each leg) that let you mount large size or standard water bottle cages. Both are designed to run just about any combination of parts and accessories you'd want on a fork and are finished in durable black powdercoat. The only real differences are 1) ECR is disc brake only, and 2) ECR's offset is 47mm, 5mm more than Ogre's.
- Axle-to-crown: 468mm
- Offset: 47mm
- Steerer: 260mm, 1-1/8" straight
- Tire Clearance: 29 x 3.0"
- Weight: 3.1 lb (1.4kg) uncut

$130.00
Designed for Surly's Krampus frame, this fork has quick-release dropouts spaced at 100mm and clearance for a 3-inch tire on a 50mm rim. To accommodate such big tires it's got a longer axle-to-crown measurement than the Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs.
- Axle-to-crown: 483mm
- Offset: 47mm
- Steerer: 260mm
- Tire Clearance: 29 x 3"
- Weight: 1133g uncut

$130.00
The Ogre fork is non-suspension corrected and will run 29-inch as well as 27.5-inch tire options. Made of 4130 CroMoly, it's got 51mm IS disc mounts, removable cantilever pivots, brake-line guides, low-blade threaded barrel bosses and mid-blade eyelets for a rack. This fork is designed to run disc brakes, fenders and a rack simultaneously. It's got two sets of triple bottle mounts, one on each leg.
- Axle to Crown Length: 447 mm
- Brake Mount: Canti studs, IS Disc Brake 160
- Crown Race: 30
- Front Axle: 9mm x 100mm
- Material: Chromoly Steel
- Offset: 43 mm
- Steerer Type: Straight 1-1/8-inch
- Wheel Size: 29-inch, 27.5+
- Powdercoat finish

$130.00
Surly's Steamroller Fork pairs great handling with urban utility. It has steep track geometry for lightening fast response, making it as at home on the velodrome as it is flying downtown with cars and pedestrians. It features a flat crown, drilled to accept a standard-reach caliper brake, and the use of wide 38mm tires. And its stealthy Black powdercoat means your opponents in the Pursuit race will never see you coming!

$130.00
The Troll Fork is just like the one that comes with the Troll frame, a 26-inch wheeled fully geared utility bruiser and cruiser. Like all Surly's forks, it's constructed of CroMoly steel. It sports removable rim brake pivots as well as a 51mm disc caliper mount. The Troll Fork is designed to accept a rack while using a disc brake, via through-blade threaded mounts in two places on each fork blade, and it's even got fender eyelets.
- Disc or rim brake compatible
- Compatible with disc brakes and rack simultaneously
- Fits 26-inch wheels with clearance for a 3.0-inch tire
- Steerer Type: Straight 1-1/8-inch
- Sleek powdercoat finish