- Aluminum straddle cable carrier for cantilever brake
- Dispenser of chromed ferrules - 5mm
$9.00 - $11.00
Dimension Seatpost Binder Bolts - 16g
Dimension Basic Track Cog Lockring with 1.29-inch x 24 tpi left-hand thread. - Stainless steel - Fits all but Campagnolo and Miche hubs - Not compatible with Phil Wood hubs
$17.99 - $25.00
Dimension Seatpost Clamps - Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm - Weight: 34g
Dimension Stem Column Adaptors - Total quill length 180mm - Measurement from minimum insertion to top of steerer adaptor is 118mm - Alloy - Quill insertion diameter: 1-inch
A seatpost retention plug that holds an electronic shifting system battery securely inside ENVE carbon seatposts. Electronic shifting is the gold standard and more bikes are coming equipped with these groups. Housing the battery into the seatpost is an elegant solution and a good use of space. Available in 25.4, 27.2, and 30.9/31.6mm sizes, these plugs are designed to provide excellent battery retention and interface perfectly with ENVE carbon seatposts.
A perfect complement to your ENVE cockpit and fork. The ENVE compression plug keeps your ride straight as an arrow and looking good.
Keep adhesives off your bike!This is the finishing tape included in our RCT Wrap Kits! If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products.
$26.00 - $28.00
- Blue polyurethane upgrade dust wipers and oil seals - Dual lip offers improved seal with lower stiction - Fox 32mm and 36mm kits include wipers, oil seals, crush washers, and foam rings - Fox 40mm kits include wipers and seals
Stainless steel pedal washers - Sold in pairs
Weight-savings is no excuse to have an ill-fitting cockpit. Shave every possible gram with these Carbon Headset Spacers from FSA, and ensure your bike fit is right on the money.
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt
It seems so small and insignificant, yet it's so important. The BB30 Wave Spring Washer is the keystone in your bottom bracket assembly, providing compression for proper setup and bearing preload, while helping to maintain adjustment after it's dialed in just right. They're also quite easy to lose or damage, so grab a few while you're at it.
- Super light carbon spacers for tuning stem height - Spacers are internally weight relieved to drop a few extra grams
- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10
This is an FSA MegaExo Crank Arm Bolt for 19mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M12 bolt, M27 self-extracting cap, and washers
This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers
The perfect bike fit is priceless. These FSA Polycarbonate Headset Spacers, however, are very affordable, and an easy way to dial in that fit for optimum performance and comfort.
$11.99 - $12.99
Keep that front end tight and responsive, while preserving the integrity of the carbon steerer on your high-end fork with FSA's Headset Compression Plug. - Alloy top cap - For carbon steer tubes
Snap rings are pretty ingenious, except they love to launch in an impossible-to-track direction when removing or installing. Maybe you should keep a spare set of these BB30 Inner Snap Rings, just in case.
$12.99 - $14.99
Dial in the perfect cockpit by spacing your stem with these lightweight, easy-to-install Aluminum Headset Stack Spacers from FSA.
This is an FSA Self-Extracting Left Crank Arm Bolt for Mega Exo ATB Cranks - 30mm long - 14g - Designed to fit FSA ATB cranks only - Includes M18 bolt, M27 self-extracting cap and washers
This is an FSA MegaExo Crank Arm Fixing Bolt for MegaExo Cranks. - 26mm length - 12g - Designed to fit FSA cranks only - Includes M18 bolt, M27 self-extracting cap and washers
This pair of spacers from FSA adapts a 386 EVO crankset to a 68mm BB30 or PF30 frame using the existing BB30/PF30 bottom bracket designed for your frame.
This FSA Double Chainring Nut/Bolt Set feature T-30 Torx sockets to resist stripping and ensure that you have reliably secure chainrings. - Torx wrench included
This FSA MTB Chainring Nut/Bolt Set feature T-30 Torx sockets to resist stripping and ensure that you have reliably secure chainrings. - For MTB triple cranksets - Torx wrench included
This FSA Triple Chainring Nut/Bolt Set feature T-30 Torx sockets to resist stripping and ensure that you have reliably secure chainrings. - For road triple cranksets - Torx wrench included
Your frame is BB30 or PF30. Your crank is 386EVO. No sweat. This adapter from FSA makes it happen. - For road use - Weight: 50g
If your plan is to install a 386EVO crank into a PF30A or BB30A Cannondale frame, look no further. This adapter from FSA is just what you need.