Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$90.00 - $131.00
Paul Components Melvin Chain Tensioner. Converts frames for single speed use. Long enough for a Dingle-setup, (2 rings, one cog) 20T max. - The Melvin uses two pulleys, just like a rear derailleur, which gives it 20 teeth of chain wrap - Will work with multiple front chain rings while maintaining proper chain tension - The pulleys are made of extruded and machined aluminum and have sealed bearings for durability - Pulleys are 2.25mm thick at the tooth which fits inside most narrow 6 through 9 speed chains, and the pulley cage is wide enough to allow 1/8? single speed chains as well - Long enough for a Dingle-setup, (2 rings, one cog) 20T max - Do not use with a coaster brake or fixed gear - Includes Paul's own Sealed Bearing Pulleys
$130.00
Have a current Bomber Z1 but missing that Coil Spring feel? Or, maybe you have a Bomber Z1 Coil already and want to customize its ride. Look no further. With this conversion kit, you can now convert your Bomber Z1 air fork easily to the Z1 Coil. Buy this upgrade kit and follow the install instructions (or have your bike shop swap it out for you) and you, too, will be riding the buttery-smooth Z1 Coil in no time. NOTE: To do the conversion, you will also need to purchase the Bomber Z1 Coil Conversion Spring
$129.60
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss EXP 54 Tooth Upgrade Kit
$127.49
Gain an aerodynamic advantage with Origin-8's Tri Clip-On Aero Bars. These aluminum clip-ons fit a wide range of handlebars. With independent arm rests and bar-angle and reach adjustments, it's easy to get a great-fitting aero setup.
$126.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 30mm - Width: 7mm
$123.99
- Internal junction-A with two e-Tube ports - Externally facing charging port eases charging, especially for internal batteries - Mounts in road bar end or in frames with an integrated mounting point - For easier cable routing, use along with EW-JC130 three-way e-Tube cable
$122.00
Giant's Connect SL S-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the S-Bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.
$122.00
Giant's Connect SL Ski-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the ski-jump bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.
$121.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 26mm - Width: 5mm
$116.00
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 36T
$115.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 28mm - Width: 7mm
$111.00
- Lever Assembly, Aluminum lever Gen 2, Black Ano (assembled, no hose, and includes barb and olive), Guide RSC
$110.00
- Accessory base plate to mount EnergyPak Plus on the bike. - EnergyPak Plus accessory comes with a water bottle cage adaptor plate that can be mounted to the base plate when the EnergyPak Plus is not in use.
$109.99
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Includes end cap for 12 x 142 and 12 x 148mm hubs Fits Shimano 12-speed Micro Spline cassettes Crafted from lightweight aluminum Compatible with 12mm thru-axles
$108.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 24mm - Width: 5mm
$107.73
Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts
$106.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 12mm - Outer Diameter: 24mm - Width: 6mm
$105.00
-Seatpost clamp for Propel Advanced ISP models (2013-2016)
$104.00
The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
$104.00
The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
$104.00
The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
$104.00
The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
$104.00
The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
$104.00
The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
$104.00
The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
$103.95
Metric fastener kit with an assortment of nuts, bots and washers. - Assortment of commonly used bicycle fasteners
$102.78
Master cylinder assemblies for Magura brakes include a master cylinder, lever blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side.
$100.00
Salsa Pivot Service Kits
$100.00
Salsa Split Pivot Suspension Service Kits, for all 2014+ Horsethief, Pony Rustler, Spearfish, Redpoint and Deadwood Sus frames.