Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Cranksets

Black Ops One Piece Crankset
$39.59
- One-piece chromoly crankset - 24TPI - Length: 175mm - Weight: 997g
Campagnolo Centaur Crankset
$237.00
Many top features are packed into the Centaur crankset. The four-arm design allows for independent bolt circles, offering greater stiffness and structural integrity, and also provides additional versatility, as a single crankset is compatible with both standard compact and semi-compact chainrings. Add these features to the first aluminium crankset with an Ultra-Torque axle and the result is a component that is very similar to the top-of-the range part. - Requires use of Ultra-Torque bottom bracket cups-Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - Ultra-Torque system have both drive and non-drive side bearings pre-installed
Campagnolo Chorus 12-Speed Crankset
$408.00
The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686
Campagnolo Record 12x2 Speed Crankset
$555.00
The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Campagnolo Chorus Crankset
$580.00
Campagnolo is all about drivetrain evolution, and their Chorus Crankset proves it. The full-carbon cranks and 4-arm spider feature a unified bolt pattern that allows for all three chainring standards. This design incorporates an 8-bolt pattern with a spider arm that not only holds the chainring in place by way of the bolt, but also supports the chainring to increase system rigidity. The crank arms and spider are hollow for maximum stiffness and minimal weight. The integrated Ultra-Torque spindle joins the crankset together via a toothed Hirth joint in the center. - Chainring BCD: Campagnolo 146 Asymmetric, Campagnolo 112 Asymmetric
Campagnolo H11 Crankset
$720.00
Designed specifically for use with H11 groupsets. Full Carbon crank arms and spider are hollow for maximum stiffness and minimal weight. Utilizes USB ceramic ball bearings. Light weight hard anodized alloy chainrings and alloy chainring bolts. Utilizes Campagnolo's Ultra-Torque crank system. - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - USB ceramic bearings increase smoothness and decrease rolling resistance, weight and the need for maintenance. USB bearings are 50% smoother than standard Campagnolo bearings - Ultra-Torque system have both drive and non-drive side bearings pre-installed - Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Required for use with H11 Ergopower shift levers, the crank spider is shifted outward to adjust for 135 and 142mm hub spacing while maintaining the Q-Factor - Requires use of Ultra-Torque bottom bracket cups
Campagnolo Super Record 12x2 Speed Crankset
$995.00
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Dimension Cross Crank Arm Set
$59.99
Dimension Cyclocross Arm Sets made of 6061-T6 aluminum. - Forged AL-6061-T6 - BB Not Included - Chainrings Not Included - 110/74 BCD - Drivetrain Speeds: 10, 9, 8 - Number of Chainrings: Double - Pedal Spindle: 9/16-inch - Spindle interface Type: Square Taper JIS - Weight: 590g
Easton Asymetric CINCH Spider
$16.99
- Asymmetric four arm shape for greater stiffness in the power zones of the pedal stroke - Compatible with 9/10/11 speed chains, mounts using a common Park BBT-22 tool
Easton Chainring Bolts
$16.99
- Chainring bolts for double cranks - Torx heads
Easton Spider & Ring Assembly
$120.00 - $149.99
Easton spider and ring assemblies for CINCH cranks.
Easton EC90 SL Spider and Ring Assembly
$149.99
The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum
FSA BB30 Crank Bolts
$13.25
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
FSA 30mm Crank Bolt with M30 Cap
$13.99
- M30 cap with self-extracting crank bolt and washer - Compatible with 2013 and newer FSA Gossamer cranks
FSA JIS eBike Crankarms
$28.99
FSA JIS Square Taper eBike replacement crankarms. Note: Spindle bore orientation varies with crank arm length - 155mm arms have diamond spindle bore orientation with sides at 45° angles to the crank arm - 170 & 175mm arms have square spindle bore orientation with sides parallel to the crank arm
FSA BROSE Crankarms
$42.99 - $46.99
FSA BROSE eBike replacement crankarms.
FSA BB-386EVO/Press-Fit BB30 Bearing Assembly
$50.00 - $200.00
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options
FSA Bafang Crankarms
$56.99
FSA CK-603 crankarms for Bafang equipped eBikes. - Bead blasted anodized finish
FSA Gossamer Tandem Front Crankset
$179.99
To be in sync on a tandem is the essence of the experience. FSA's Gossamer tandem cranksets keep your timing perfect, and keeps the power going to the rear wheel where it belongs. The communication and balance? That's up to you and your partner. - Shimano and SRAM 10-Speed compatible
FSA Energy Modular BB386EVO Crankset
$269.99
The latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow forged arms - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs - Spindle Interface Type: 386 EVO - Chainring BCD: 90, Direct Mount FSA - Pedal Spindle: 9/16" - Crank Intended Use: Road, Gravel - Crank Length: 170mm - Rings: 46/30 - Drivetrain Speeds: 11 - BB Included: No - Weight: 755
FSA Gossamer Tandem Crankset (Rear)
$269.99
Harness the power of your tandem team with FSA's Gossamer MegaExo Tandem Crankset. The rear crankset features cold-forged aluminum crankarms, hill-topping 52/39/30 chainrings, a 42-tooth idle chainring, and a proprietary spacer system to fine-tune your chainline.
FSA Gossamer Tandem Rear Crankset
$269.99
To be in sync on a tandem is the essence of the experience. FSA's Gossamer tandem cranksets keep your timing perfect, and keeps the power going to the rear wheel where it belongs. The communication and balance? That's up to you and your partner. - Shimano and SRAM 10-Speed compatible - 2 bottom bracket spacers allow for adjustable chainline - 35.0mm tandem-specific braze-on front derailleur clamp included with rear cranks - 7900 and Campagnolo 11-speed compatible chainrings sold separately
FSA SL-K BB392 Tandem Crankset
$382.99 - $543.99
The FSA SL-K carbon tandem cranks feature an asymmetrical modular compact 2 x 11-speed spider, 30mm spindle, and tons of adjustability. - Hollow carbon arms with UD carbon finish - Asymmetrical 110 A.B.S BCD achieves 4 chainlines (44,47,50,53) - English BB included - 104 BCD timing spider - 653 grams - Number of Chainrings: Single - Crank Intended Use: Tandem - Pedal Spindle: 9/16" - Rings: 38 - Spindle Interface Type: 392 EVO - BB Included: English
FSA SL-K Modular BB386EVO Crankset
$420.00
SL-K modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow carbon fiber arms with UD finish - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems
FSA K-Force WE Crankset
$531.99
This Hollow Carbon Crankset features reduced weight, and excellent stiffness. The K-force WE system is perfect for triathlon and/or time trial riders who want advanced technology without the bulk. - Lightweight hollow carbon arms with UD carbon finish - Maximum frame compatibility with a forged AL7050 BB386EVO spindle - Innovatively designed for a better ride, the variable thickness means that it’s reinforced at critical stressed areas and reduced in other areas for lighter weight - Chainring pins are AL7075 forged then 100% CNC 3D machined, to increase outer chainring stiffness and provide efficient up-shift pin design for full-power performance - AL7075 Torx T-30 alloy chainring bolts - Number of Chainrings: Double - Crank Intended Use: Road, Tri - Pedal Spindle: 9/16" - Rings: 50/34 - Spindle Interface Type: 386 EVO - Drivetrain Speeds: 11 - Chainring BCD: 110 - Weight: 534 - BB Included: No
FSA K-Force Light ABS BB386EVO Crankset
$628.99
The FSA K-Force Light ABS BB386EVO road crankset features hollow carbon fiber arms for incredible stiffness and minimal weight. The adaptable BB386EVO 30mm spindle will fit a wide variety of frames and a broad range of BB standards. Using FSA’s Asymmetric Bolt Standard, with four bolts for maximum power transfer, the K-Force Light is extremely efficient. And, the unidirectional carbon finish, updated graphics, and concealed chainring bolts make the K-Force Light look as good as it performs. - Hollow carbon arms with UD finish - Forged AL7050 BB386EVO spindle - Cold-forged CNC chainrings - AL7075 Torx T-30 alloy chainring bolts - Fits FSA, Shimano, and SRAM 10/11s systems - Bottom brackets sold separately; BB selection will depend on frame shell interface
MRP 1x V3
$79.95
The 1x guide is the definitive cross-country chainguide. Used on the World Cup circuit and even in the 2012 London Olympics, the 1x has a proven track record of dependability and performance. The 1x is the perfect guide for riders and racers wanting a lightweight single-ring front drivetrain for cross-country use or riders wishing for more security out of their "narrow/wide" or XX1/X01 setups. Freshly updated for 2015 with the new co-molded "TR" upper guide - lighter and quieter, what's not to love? - Adds security to "narrow/wide" 1x10/11 and XX1/X01 drivetrains - Most models accommodate 26-38t chainrings - Tracked and grooved upper guide / backplate interface increases stiffness and eases installation - New co-molded "TR" upper guide with softer durometer interior for silent guidance - All install and adjustment operations possible with just a single 4mm HEX wrench. - BB mounted guides are only compatible with traditional, threaded BB systems
MRP AMg V2 Carbon
$169.95
The newly redesigned All-Mountain Guide is the love child of two innovative and revered product lines, the 1x and XCg. Perfectly suited to the increasingly popular all-mountain segment, the All-Mountain Guide shares the freshly updated "TR" upper guide with the 1x, and adds MRP's patented integrated skid. The All-Mountain Guide is a great choice for 5-6" travel bikes when used with the latest tensioned rear derailleurs or on its own for shorter-travel trail bikes or hardtails that require bash protection. The contact-free, "upper-only" chain retention means the All-Mountain Guide will be virtually silent and completely drag-free when pedaling. The patented integrated skid will protect your crank and chainring and prevent the chain from ever contacting and potentially damaging your expensive frame. - Perfect for "clutched" 1x10 and 1x11 drivetrains, as well as those using chain-retaining rings (like our Wave Ring) - New nylon integrated skid protects chainrings and glides over rocks and obstacles - Tracked and grooved upper guide / backplate interface increases stiffness and eases installation - New co-molded "TR" upper guide with softer durometer interior for silent guidance - Available in 28-32t and 32-38t sizing - All install and adjustment operations possible with just a single 4mm HEX wrench. - Compatible with chainlines 49mm and wider
North Shore Billet 2x10 Spider for SRAM GXP Cranks
$70.00
The North Shore Billet 2×10 Spider replaces the stock chainring spider so that you can run smaller chainrings on SRAM XX1, X01, X1, X0, X9, X7, and GX cranks using GXP bottom brackets. With the NSB 2×10 Spider you can run a more traditional 22/32T or 24/34T combination. The NSB 2×10 Spider is designed to use any standard 64 / 104 BCD 9 speed chainring. The distance between the rings and the distance from the centre of the bottom bracket is the same as the 120 BCD spider so the set up is simple and the shifting is quick!
Origin8 3.5mm Chainring Spacers
$5.10
Spacers to insure proper chainline and chainring spacing on your bike. - 3.5mm thick - Material: alloy
Page 1 of 7 Next page