Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Derailleurs

Campagnolo Front Derailleur Braze-On Adapter
$38.00
- Hinged band clamp for fitting braze-on front derailleurs on frames without braze-on mount - Aluminum construction - EPS compatible
Campagnolo EPS Front Derailleur Stiffener
$105.00
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
Campagnolo Chorus EPS Braze-On Front Derailleur
$485.00
Campagnolo's EPS Chorus Front Derailleur is made with a featherweight carbon fiber body for an unbeatable stiffness to weight ratio. The high torque, high drive motor is made in Switzerland to ensure the ultimate in shifting precision and reliability. Plus, the cage sports a special surface treatment for added stiffness and durability. - EPS Electronic Power Shift electronic front derailleur. This front derailleur requires specific, separate EPS wire harness, battery pack, and shifters - Monolithic technopolymer, carbon fiber body for the best stiffness and weight possible - Features an alloy outer cage, steel motor and gear housing - Waterproof, high over torque motor-gear box creates solid, ultra fast, under load front shifts - Automatic re-positioning/trim depending on the rear cog selected - Ride Setting allows returning home in the inner chainring should battery power fall - Rings: Double - Speed: 11 - Derailleur Capacity: 16 - Min/Max: 34/55 teeth - Weight: 149g
K-Edge K-EDGE 1x Mountain Chain Guide
$99.99
K-EDGE MTB Chain Guide is built to be the strongest and lightest solution to withstand the pedaling force of a derailed single ring chain in World Cup race conditions. - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - “Hard to fit kits” may be needed for current applications, please contact Info@k-edge.com - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
Microshift Mezzo Front Derailleur
$12.99
Mezzo front derailleurs offer durable construction and seamless compatibility with existing systems, making repairs and upgrades easy. - Aluminum bracket, plastic body - Includes 31.8mm clamp adapter
Microshift Marvo LT Front Derailleur
$14.99 - $25.99
Featuring full metal construction and precisely engineered linkages, Marvo level derailleurs deliver high-end performance that will last. - Full aluminum construction - Dual-pull design - 34.9mm version includes 31.8mm adapter
Microshift T3828B Front Derailleur
$18.99
This microSHIFT dual pull trekking front derailleur is compatible with 2x8 mountain bike drivetrains, and cranks with up to a 48t large cog. - Durable metal construction - Compatible with Boost and non-Boost chainlines - 16t capacity - Drivetrain Speeds: 8 - Double or Triple: Double - Derailleur Capacity: 16 - Front Der/Shifter Compatibility: Shimano Mountain - Front Derailleur Cable Pull: Dual - Front Derailleur Clamp: 34.9 (1-3/8") , 31.8 (1-1/4") - Max Ring (teeth): 48
Microshift M26 Rear Derailleur
$22.00 - $25.00
M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. These legendary M26 rear derailleurs put cyclists of all ages back on their saddles with as little frustration as possible. - Robust composite and steel construction - Compatible with Shimano 7, 8, and 9-speed mountain and road systems
Microshift R539 Front Derailleur
$25.99 - $32.50
Full metal construction provides stiffness and durability in this Shimano 9-speed road compatible front derailleur. - Full aluminum construction - Compatible with 9-speed Shimano road drivetrains - Designed for use with 52/42/30T chainrings
Microshift R10 Rear Derailleur
$42.99
R-series rear derailleurs are designed to work with 7, 8, 9, and 10-speed Shimano-compatible road shifters. These R10 aluminum rear derailleurs are lightweight, precision CNC-machined, robust, and can get any bike back on the road. - Lightweight all-aluminum construction - Compatible with Shimano 7, 8, 9, and 10-speed road systems - Not compatible with Shimano Tiagra 4700 road system - Short cage for double crankset and 28T max cog - Medium cage for double crankset and 34T max cog
Microshift ADVENT Rear Derailleur
$44.99 - $47.99
Not everyone needs the added chain retention of a clutch derailleur. For those riders, we offer a non-clutch version of our innovative ADVENT derailleur. Without the clutch in the system, the shifting effort at the lever is reduced. While still capable of handling an 11-42T cassette, the rear derailleur is the perfect choice for commuter or touring bikes that can benefit from using a wide-range gearing system. - Direct cable routing for smooth and responsive shifting - No clutch for ultra-smooth shifting - Compatible with 11-42T 9-speed cassettes - Compatible with ADVENT shifters only
Microshift ADVENT Rear Derailleur w/Clutch
$72.00
Designed with the rider in mind, the ADVENT rear derailleur packs trail-ready features into an attainable wide-range drivetrain system. The derailleur kinematics are precisely tuned to use a more direct cable path, making the shifting feel consistent across the lowest and highest gears, and everything in between. - Clutch provides stronger chain management over rough terrain - Ratchet-and-pawl clutch is easily adjustable and repairable - Direct cable routing for smooth, responsive shifting - Compatible with 11-42T 9-speed cassettes - Compatible with ADVENT shifters only
Microshift ADVENT X Rear Derailleur
$85.00
With a race-worthy weight and the right gearing for any situation, microSHIFT's top-of-the-line ADVENT X rear derailleur delivers high-end performance without high-end headaches. By using a 10-speed chain and wide range 11-48T cassette with predictable, evenly spaced gear steps, ADVENT X allows you to find the right gear even in challenging conditions. Add in microSHIFT's proprietary ratchet-and-pawl clutch, larger pulleys with taller teeth for better chain retention, and metric adjustment hardware, and you've got everything you want and nothing you don't. - Compatible with ADVENT X 10-speed drivetrains only - Compatible with standard 10-speed chains - Ratchet-and-pawl clutch provides chain security and can be turned on and off with a switch - Metric adjustment hardware - Larger pulley and taller teeth for better chain security and higher ride height
Origin8 MaxFit Braze-On Front Derailleur Adapter
$13.99
Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.
Origin8 Direct Mount Adapter
$22.99
• Converts direct mount front derailleurs to clamp on • Lightweight alloy • Fits 68/73mm and 100mm bottom brackets • 34.9mm clamp
Origin8 Braze-On Front Derailleur Adapter
$26.00
• Converts Braze-on front Derailleurs to clamp on • Lightweight forged alloy • Weight: 28g
Paul Component Engineering Melvin Chain Tensioner
$90.00
- Machined aluminum tensioner bolts on to derailleur hanger - Adjustable spring tension and dual floating pulley - For frames with vertical dropouts - Fits hubs with 22-28Mm chainline (From inside of dropout) - Made in USA
SRAM Direct Mount Derailleur Cover
$15.00
• Covers the unused high-mount front derailleur mount on 1x-equipped bikes • Black anodized aluminum
SRAM X3 7-/8-Speed Rear Derailleur
$22.99
SRAM's X3 Rear Derailleur is ready for adventure. Its composite and steel construction is tough, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.
SRAM GX 2x11 Front Derailleur (High Direct-mount, Bottom-pull)
$40.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically for SRAM 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11-speed rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
SRAM GX 2x11 Front Derailleur (Low Direct-mount, Bottom-pull)
$40.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically around SRAM's 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible, so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
SRAM GX 2x11 Front Derailleur (Low Direct-mount, Top-pull)
$40.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically around SRAM's 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and their GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible, so no terrain is off limits. • Max ring (teeth): 38-tooth • Derailleur capacity: 14-tooth
SRAM X5 9-Speed Rear Derailleur
$47.00
SRAM's X5 9-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.
SRAM GX Type 2.1 10-Speed Rear Derailleur
$63.00 - $70.00
SRAM's GX 2x10 rear derailleur provides incredible shifting speed and precision. Exact Actuation technology eliminates slop and shifting variation. Roller Bearing Clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with Cage Lock technology, wheel removal and installation are easier than ever.
SRAM X0 2x10 Front Derailleur (High Direct-mount, Bottom-pull)
$77.00
SRAM's X0 2x10 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth and lightning-quick shifting even under load.
SRAM XX Front Derailleur (Direct-mount, Bottom-pull)
$111.00
When SRAM began developing XX, they were looking to create the lightest, most precise and technically advanced components possible, and boy have they delivered! The XX Front Derailleur is crafted from forged aluminum and steel to ensure a ridiculously low weight, while still delivering the precision and durability SRAM is known for. Plus, this beauty has been painstakingly engineered to throw down the fastest and smoothest front gear changes you've ever experienced.
SRAM Force Rear Derailleur
$155.00
Incredibly fast, buttery smooth and impressively precise gear changes are here with SRAM's Force Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Plus, the Force is crafted with cutting-edge materials, such as a super-light carbon cage and a magnesium inner link for feathery low weight, flawless shifting and reliability.
SRAM RED Rear Derailleur
$358.00
With SRAM's RED Rear Derailleur, SRAM set out to make their already race-proven design lighter, faster, and quieter. Through careful analysis of design, material selection, and component integration, they achieved all three. Refined shaping and a hollow titanium fixing bolt lighten the overall weight while maximizing performance. Carefully sculpted jockey wheels work together with the new chain pulley cage for lightning-fast, ultra-precise shifts. An updated elastomer coating applied to the jockey wheels makes for extra quiet operation. Plus, a redesigned shift cable routing makes set-up and adjustment easier than ever! Light, fast, and quiet, the RED derailleur delivers!
SRAM RED eTap Rear Derailleur
$649.00
The SRAM RED eTap rear derailleur executes shifts the instant you demand, wirelessly. It's easy to set up, clean in appearance, and delightfully uncomplicated. Mechanical necessities, such as a carbon pulley cage, ceramic pulley bearings, and anodized alloy artfully blend with proprietary electronic advancements to deliver a shifting wonder. - SRAM eTap shift logic and wireless operation - Fits all 11-speed SRAM road cassettes up to 11-32T - 2x and 1x compatible - Updated version of the original SRAM RED eTap rear derailleur - Orbit chain management technology keeps drivetrain quiet and secure - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries
SRAM XX1 Eagle AXS Rear Derailleur
$700.00
More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately
Page 1 of 3 Next page