Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Lights

Bontrager Flare Round Mounting Kit
$2.99
Product details: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters
CatEye C-2 Clothing Clip
$2.99
Updated and more secure clothing clip for mounting CatEye safety lights.
Lezyne End Plug - Strip Drive F/R
$3.49
Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights
Lezyne End Plug - Y10 Hecto/Micro Drive
$3.49
Replacement rubber end plug for the Hecto Drive, Micro Drive or Mini Drive lights.
Lezyne End Plug - Y10 KTV Drive F/R
$3.49
Replacement rubber end plug for the KTV Front, KTV Rear and KTV Pro Rear lights.
Lezyne Go-Pro LED Adapter
$3.49
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
Lezyne LED Handle Bar Mount Adapter
$3.49
Lezyne's LED Handle Bar Mount Adapter is a composite matrix adapter to replace the rubber strap that ships on 2016 and later models of Macro XL, Power XL, Super XXL, and Deca XXL lights, so that they can be used with the Aluminum Handlebar Mount, the Composite Handlebar Mount, Aluminum Helmet Mount, or Composite Handlebar Mount.
Light & Motion Vis Pro Replacement Strap
$3.99
Need to replace a strap on the compact Vis 180 Pro taillight or the front mount of the Vis 360 Pro? This is a durable direct replacement that installs in seconds and can be cut to the preferred length.
Giant Numen Taillight Seatpost Mount
$4.00
- Replacement taillight mount for Numen lights
Sunlite TL-L225 Bracket
$4.19
- Rack mount bracket only - Fits TL-L225 taillight
Planet Bike Headlight Helmet Bracket
$4.75
- Mounts Beamer and Blaze 1/2W lights to a helmet - Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB - Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet
Planet Bike Tail Light Bracket
$4.75
- Fits seatpost (up to 31.8mm) or seatstay - Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light - Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars
CatEye SP-12 Flex-Tight Bracket Rear
$4.95
SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights
NiteRider Tail Light Mount – Seatstay and Seatpost
$4.99
The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
Giant Numen Aero Rubber ISP Mount
$5.00
- Replacement aero mount for Numen light
Giant Numen Headlight Handlebar Mount
$5.00
- Replacement handlebar mount for Numen lights
MSW Front Mounting Bracket for White Bat Headlight
$5.00
Mounting bracket for MSW front White Bat Headlight. - Includes 1 front mounting bracket
MSW Mounting Bracket Pico Headlight and Tiger Moth Taillight
$5.00
Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps
Portland Design Works Tail Light Rack Bracket
$5.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
CatEye Rear Bracket
$5.95
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
TwoFish Twofish Flashlight Holder
$5.95
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
Planet Bike Quick Strap Headlight Bracket
$5.99
- Quick Strap mounts, adjusts or removes in seconds without tools - Fits 25.4-35mm handlebars - Compatible with Blazes, Beamers, 1200 and Super Spot
Planet Bike Quick Twist Headlight Bracket
$5.99
- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights - Fits 25.4 – 31.8mm handlebars
Planet Bike Quickcam Adjustable Handlebar Bracket
$5.99
- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
Planet Bike Shiner Helmet & Rack Mount
$5.99
Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks
CatEye Center Fork Bracket
$6.00
CatEye's Center Fork Bracket helps clear your handlebars by positioning your favorite CatEye headlight (sold separately) in front of your bike's head tube.
Portland Design Works Mission Control 2.0
$6.00
The Portland Design Works Mission Control 2.0 Headlight Mount is now easier to use! Wrap the heavy-duty UV-proof rubber strap around your handlebars and you're ready to blast off in seconds. - Fits 22.0-31.8 mm diameter handlebars - Compatible with all PDW headlights.
Portland Design Works StayPutNik Tail Light Bracket
$6.00
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot
Planet Bike Aero Mount Tail Light Bracket
$6.99
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal
Planet Bike Rubber Mount Tail Light Bracket
$6.99
- Compatible with seatpost diameter 20mm-36mm - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light
No Image
$7.50
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
Bontrager Blendr Saddle Accessory Mount
$7.99
The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride. - Blendr mount allows for integrated rear light attachment - Easily and securely mounts to compatible saddles - Includes mounting hardware (2—3mm M5 bolt) - Torque included M5 mounting hardware to 2Nm
Evo NiteLight Guardian Headlight
$7.99
- 1 super bright LED - Easy On/Off - Weather-tough water resistant design - Universal rubber bracket
NiteRider Tail Light Strap Mount
$7.99
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.
Problem Solvers Front Rack Light Mount
$7.99
-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
Sunlite Dot Headlight
$7.99
- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 12
Sunlite Dot Tail Light
$7.99
- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6
Sunlite 340 Taillight
$8.19
Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.
Sunlite TL-L220 OmniGrip Taillight
$8.19
• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body
Lezyne LED Handle Bar Mount
$8.49
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.
Sunlite 200 Griplite Taillight
$9.79
Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.
Sunlite K100 Headlight
$9.89
Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.
CatEye Omni 3 Taillight
$9.95
Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.
FuelBelt Fire Flare Band
$9.99
- Be safe and be seen with hi-viz red LED safety lights - 360-degree visibility with rapid blink, slow blink, and full glow LED modes - Sweat-proof, water resistant design moves with you - Lightweight material for ultimate comfort - Dimensions: 2.68cm x 3.03cm x 1.02cm
Lezyne Composite Helmet Mount (XL)
$9.99
Lezyne's versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne Mini XL, Power XL, Super XL, Deca and Mega Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
Light & Motion Imjin and Nip GoPro Mount
$9.99
Set up a light wherever you can connect a GoPro mount. Use this adapter to connect your Imjin or Nip to any GoPro mounting option.
Light & Motion Pro-Max Adaptor
$9.99
Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.
Light & Motion Taz GoPro Mount
$9.99
Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Taz to any GoPro mounting option.
Light & Motion Tuck Seat Post Mount
$9.99
Replacement seat post mount for the Tuck e-Bike Taillight. Secure design with non-slip strap ensures light is stationary even in rough, bumpy terrain. - Includes plastic wedge spacers to ensure Tuck mounts at optimum angle for premium visibility
Light & Motion Vis 180 Aero Post Pad
$9.99
Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.
Light & Motion Vis 180/Vis 180 Micro Rack Mount
$9.99
This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).
Light & Motion Vya Taillight Rack Mount (GoPro)
$9.99
Vya redefines bike safety with smart, advanced features with an ultra-compact design. This innovative design allows you to mount the Vya Taillight to any GoPro interface attached to your bike rack. - Innovative twist-lock system ensures Vya will lock into mount and not vibrate free - Utilizes third-party GoPro mount interfaces designed for bike racks - Compatible with Vya Pro Taillight and standard Vya Taillight - GoPro base mount not included
NiteRider Adjustable Angle Tail Light Strap Mount
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb
NiteRider Flashlight Handlebar Clamp Mount—35mm
$9.99
The NiteRider Focus+ Handlebar Clamp Mount is here to deliver an efficient and practical solution to mount your handheld light to your bicycle. It fits a max bar diameter of 35mm. Not intended for mountain terrain or off-road use. System Compatibility - Focus+ 370 - Focus+ 545 - Focus+ 1000 Accessory Includes - Focus+ Flashlight Handlebar Clamp Mount
NiteRider Handlebar Clamp Mount 35mm
$9.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
NiteRider Lumina Handlebar Strap Mount
$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
NiteRider Micro USB Cable
$9.99
USB cable for charging NiteRider® bike lights that utilize a micro USB charge port connection System Compatibility - All Lumina Series - Swift Series - MiNewt Cordless Series - MiNewt Mini Series - Lightning Bug 120 - Sentinel - Solas - Omega - Sabre - Sentry Aero - Stinger
NiteRider NiteRider GO Action Camera Adapter (Lumina or Mako Series)
$9.99
If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. System Compatibility - Lumina Series - Mako Series
NiteRider Omega 300 Tail Light Seat Post Strap Mount
$9.99
The NiteRider Omega 300 Seat Post Straps install quickly and easily with the loop around and hook design. - Compatibility: Omega 300 Tail Light only - Fits 27.2mm seat posts
NiteRider Tail Light Rack Mount
$9.99
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
Page 1 of 9 Next page