Drop

Taking cues from the legendary Ritchey Bullmoose mountain bike bar, as well as more recent Ritchey road combo bars such as the SoloStreem and MonoCurve, the SuperLogic Butano Ridge fills the demands of adventurous riders calling for a carbon fiber version of the Butano. We’ve doubled down on the original concept of the Butano by blessing it with the SuperLogic treatment and delivering an integrated bar/stem combo that is lightweight, stealthy, and more than capable of handling the rough stuff when it turns into fast rough stuff. This magnificent monocoque carbon fiber beauty offers complete internal cable/wire/hose routing for modern gravel and road bike frames. The underside of the bar features a removable cable cover offering easy access for cable routing and doubles its duty with the ability to receive an integrated accessory mount (sold separately). The breathtaking aesthetics of the Butano Ridge are well complimented by its supreme comfort and control afforded by its shallow drop, short reach, and pleasant backsweep – as well as the ergo aero tops that deliver logical ergonomics.

Get back on the road with genuine replacement parts. - Includes hardware and covers to allow for flush cut or exposed steerer - 3cm narrower at the hoods than in the drops - For optimal aerodynamic benefit - Only compatible with the Madone Gen 7

The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It's the fastest leading edge we've ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we've ever made, with no compromises. It's aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory. AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar's leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference. LIGHT AND STIFF: By removing the stem's hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we've ever made. FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we've got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar. - Aerodynamically engineered to save 4 watts vs a traditional aero road bar - Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts - Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm) - Bend: 125mm drop x 75mm reach, 4 degrees of flare at the drops - Stem Angle: 6-Degrees - Steer Clamp Diameter: 31.8 - Weight: 310 grams (100mm x 420mm) - Cable Routing: Shimano, SRAM, Campagnolo ( Internal/Electronic Compatible) - Compatible with Roval bolt on computer mount, S219900058. - System Weight Limit: 275lbs/125kg

An OCLV Carbon integrated road bike handlebar/stem with an ergonomic and aerodynamic shape. POSITIONED FOR POWER The Trek Aero RSL Road Integrated Handlebar/Stem is built upon our Race Fit, with a shorter reach and hoods that are 3cm narrower than the drops. This moves you into a more comfortable ergonomic riding position that greatly reduces rider drag for an e/tra aerodynamic advantage. A 6-degree flare allows for ample wrist clearance and control, so you don't lose any power or comfort in e/plosive sprinting moments. Plus, riders get the weight-saving and aerodynamic advantage of a single-piece bar combined with stem. PRODUCT DETAILS - OCLV Carbon construction is ultra-light, compliant, and durable - 7-degrees of ergonomic backsweep reduces rider drag for e/tra aerodynamic speed and comfort - Hoods measure 3cm narrower than drops - 6-degree flare provides ample wrist clearance for sprinting - Brake lever position guides for spot-on control set-up - Electronic shift compatibility only - Only compatible with Madone Gen 8 - Race Fit puts riders into a more comfortable, ergonomic riding position

An integrated bar and stem combo that cleanly and securely holds cables for a refined look and added aerodynamics. Save watts, ride faster This aero upgrade cleans up your cockpit by securely storing cables for a refined look and free speed. The Aeolus RSL bar/stem combo is proven in the wind tunnel to save 7 watts, making it 10% faster than its predecessor. It's light, fast, easy to install, and Blendr-compatible for seamless integration of your light or Garmin. Details: - OCLV Carbon construction is ultra-light, compliant, and durable - Integrated bar/stem design improves aerodynamics and saves weight - Proven in the wind tunnel to save 7 watts, making it 10% faster than its predecessor - Integrated cable management system held secure with M4 hex bolt, 5Nm torque - Variable Radius Compact (VR-C) design allows longer reach and drop - Includes Blendr mono and duo bases with mounts for Ion light and Garmin computer - Approved for use with carbon or alloy steerer

For optimal aerodynamic position. Genuine replacement parts Achieve your ultimate aerodynamic goals. - Bar only. Extensions, arm pads, and hardware not included - Accessories are available separately - UCI legal

Genuine replacement parts Features KVF shaping and integrated design for unbelievable aerodynamics and stiffness. Product details - Not compatible with other bikes - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV carbon fiber construction - Seamless integration with Blendr accessory bases and mounts, sold separately

- Ultra-light carbon composite reduces the weight while maintaining a stiff construction - Short reach and shallow drop for instant transition from the tops to the hoods to the drops - The round-shape clamping design ensures better fitting adjustments for hand and body positions - The center of clamping area meet with handlebar top seamlessly to improve aerodynamics while saving weight - An aero-optimized flattened top section reduces the front face area and improves the airflow - The edge of the handlebar top features a wider and lifted shape for better aero position - Elliptical drops improves bar stiffness without adding weight - Cable openings features a bigger opening making routing easier

Engineered for endurance riding, the ultra-lightweight Contact SLR D-Fuse handlebar offers compliance and ergonomic fit for the most demanding conditions. FEATURES: - Proprietary D-Fuse shaping on the tops for superior compliance and lightweight. - 8-degree flare in the shallow drops puts the hand and wrist in a comfortable and efficient position. - Compatible with Contact SLR and SL Aero and AeroLight stems for full internal cable routing. - Ergonomically shaped contact points fit the hand and palm from various angles, alleviating fatigue and numbness that can occur over long miles. - Precision composite lay-up for optimal weight and stiffness. - 40% more compliant and 15 grams lighter than the previous Contact SLR D-Fuse handlebar. SPECIFICATIONS: - Weight: 185g (420mm) - Bar Clamp Diameter: 31.8mm - Width: 380/400/420/440mm - Reach: 125mm - Drop: 72mm - Rise: 0° - Backsweep: 0° - Outsweep: 0° - Flare: 8° - Material: Carbon

A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)

The SES AR Handlebar reveals our vision for the future of road handlebar shaping and design. Purpose-built for the modern road rider, the SES AR handlebar features compound flared drops for confident handling, aerodynamic shaping with internal/external routing options for clean airflow and aesthetics, and a carbon laminate that has been tuned for responsive handling without sacrificing comfort. - Application: Road Race, All-Road, Gravel, Cyclocross - Sizes: 38cm, 40cm, 42cm, 44cm, 46cm - Weights: 243g, 245g, 248g, 262g, 280g - Full Integrated Internal or External Routing - Lifetime Incident Protection and 5 Year Factory Warranty

Original equipment integrated handlebar for Trek Madone SLR bikes. Genuine replacement parts Features KVF shaping and integrated design for unbelievable aerodynamics and stiffness. Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops. PRODUCT DETAILS - Not compatible with other bikes - 100% OCLV carbon fiber construction - Seamless integration with Blendr accessory bases and mounts, sold separately - For installation instructions, please see the Madone Assembly Manual - Go green and save green - Zero packaging means zero waste & zero extra cost

Original equipment integrated handlebar for Trek Madone SLR bikes. GENUINE REPLACEMENT PARTS Features KVF shaping and integrated design for unbelievable aerodynamics and stiffness. Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops. PRODUCT DETAILS - Not compatible with other bikes - 100% OCLV carbon fiber construction - Seamless integration with Blendr accessory bases and mounts, sold separately - For installation instructions, please see the Madone Assembly Manual

With Versatile Contact Position drops that feature an 8-degree flare, 3-degree outsweep and 40mm tails, the CADEX AR Handlebar sets a new standard for all-road control. A 70mm reach and shallow 115mm drop make it easy to transition from the tops to the hoods and drops. And an innovative one-piece mold construction boosts strength and stiffness while still maintaining a best-in-class weight. - 8-degree flare and 3-degree out sweep provide total control over variable surfaces. - Extended 40mm tails on the drops add stability and leverage for increased confidence when sprinting or descending. - 3-degree backsweep delivers increased comfort and balance on the tops. - A 70mm reach and shallow 115mm drop allow quick and controlled transitions between the tops, the hoods and the drops. - One-piece, no-bond mold manufacturing process reduces weight and increases strength and stiffness. - Precision carbon fiber layup provides added strength at minimal weight. - Compatible with Shimano Di2 Bar End Type Junction.

Superlight weight for a competitive edge. Comfort to carry you through long training days and crushing queen stages. The all-new CADEX Race Handlebar features innovative one-piece construction and an ergonomic design that’s stiff, responsive and easy on your hands.

- Redesigned Bio-bend that is more gentle for increased practical comfort - The SuperLogic VentureMax features ergo-aero 38x22.5mm ergonomic tops for a more comfortable hand placement - A wide 24-degree flare at the drops for a more natural arm position - Full or partial internal cable routing - The VentureMax is compatible with a Shimano EW-RS910 junction box

The Bontrager GR CheckOUT gravel handlebar sets a new standard in comfort and control for the gravel rider. The added backsweep and downsweep allow for a more natural arm, wrist, and hand position. The wider design and flared drops design bring stability, confidence, and comfort across all hand positions. The Adventure Fit gives a wider flare and shorter reach for confident handling and control access. 8 degree backsweep and 4 degree downsweep offer a natural position of the palm, wrist, elbow, and shoulder. OCLV Carbon IsoCore keeps it lights, strong, and compliant.

The E100 name is not used lightly and represents the culmination of nearly 20 years of creating the highest quality carbon components on the market. The new E100 road bar uses the same critically acclaimed Maximum Contact Drop (MCD) shape as our other premium road bars, with a stiff mid-section and long tails at the end of the drops for optimized ride characteristics and more hand positions. Most ultra-light bars sacrifice stiffness, durability and drop length to save weight, but not Easton's. The E100 bar meets the same rigorous fatigue and impact testing standards as our other road bars and does so as the lightest road bar Easton has ever created — a feathery 178g for a 42cm bar. - Finish: Matte UD Carbon/Ultra Gloss decals - Bar weight: 178g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 40cm, 42cm, 44cm - Reach: 80mm - Drop: 125mm - Materials: E100 carbon

Unparalleled comfort A carbon road handlebar with IsoCore that reduces road vibration by 20% and features a variable compact radius that offers additional ergonomic positions. Chain-rattling pavement is no longer an issue thanks to our innovative IsoCore technology in this Pro IsoCore VR-CF road bar. An additive to the carbon layup, IsoCore mutes 20% more vibration than other carbon bars. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Once you experience the comfort and control of IsoCore, you'll never want to ride another bar. - OCLV carbon with IsoCore continuous inner-laminar technology - Replaceable IsoZone EVA pads maintain original grip diameter - Variable Radius Compact Flare (VR-CF) bar shape offers greater comfort in all hand positions - IsoCore technology decreases road vibration by 20% over traditional carbon bars - Compatible with clip-on aero bars - Includes four replaceable EVA IsoZone pads for tops and drops - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing

A carbon road handlebar with IsoCore that reduces road vibration by 20% and features a shallow-flared drop and shorter-reach design. All-road comfort Take on longer rides and rougher roads with the Pro IsoCore road handlebars, which can cut road vibration by 20% for a more comfortable, less-fatiguing ride on all-day gran fondos and gravel. Together, the IsoCore inner-laminar technology and IsoZone padding virtually eliminate road chatter. This OCLV Carbon bar features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. - OCLV Carbon with IsoCore continuous inner-laminar technology - Replaceable IsoZone EVA pads maintain original grip diameter - Confidently access brake levers while in the drops with the shorter reach and Variable Radius Shallow Flare (VR-SF) design - IsoCore technology decreases road vibration by 20% over traditional carbon bars - Compatible with clip-on aero bars - Includes two replaceable EVA IsoZone top-of-bar pads - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing

FSA's K-Force Compact Road Handlebar features a racy compact design for improved ergonomics and rider comfort. Its continuous carbon/Kevlar construction is super light and impressively stiff, making it perfect for climbing and big out-of-the-saddle efforts. It also has a 110mm center section for mounting accessories and its reinforced, textured clamping areas hold tight and secure.

Wind is the ultimate cruelty, and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing, we designed the Rapide bar to cut through the wind with knife-edge efficiency, and at the same time, provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip, even when wet; there's a recessed step that sets the bar wrap flush with the tops; the airfoil is offset forward to offer greater forearm and knee clearance; and, at 225 grams, the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge. - Aerodynamically engineered to save 20+ seconds over 40km vs. a round bar - Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at 225g (size 42cm) - Innovative features, like textured tops and a smooth bar tape step, enhance your experience - Bend: 125mm drop x 75mm reach

Built upon the popular K-Wing ergonomics, this full carbon handlebar is designed for Adventure, Gravel, and Cyclocross. - Aerodynamic integrated Cable Routing (ACR) - Full carbon handlebar is designed for Adventure, Gravel and Cyclocross - Sculpted contact points for the "hoods" and "drops" riding positions for better ergonomics - Flared drops for better control and clearance when descending - Bar Clamp Diameter: 31.8mm - 115mm drop, 76mm reach - 12° outward bend - 10° forward angle - 25mm offset drops - 5mm rise - 205 grams (420mm)

With the EC70 Aero, you'll stay comfortable while reducing drag. Thanks to the flattened top profile with internal cable routing and MCD shape technology, this handlebar provides more comfort during long days in the saddle while cheating the wind. And with Easton’s proven composite TaperWall technology and Intelligent Flexibility, the EC70 SL is nice and light at just 255 grams (42cm). - Weight of 42cm bar (grams): 255 - Bar Drop (mm): 130 - Drop Bend Style: Compact - Bar Reach (mm): 80 - Material: Carbon - Bar Top Style: Flat

In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why Specialized designed the S-Works Hover Carbon Handlebars to excel on both fronts. Starting with the construction, they're made from their FACT carbon fiber for a light overall weight, vibration absorption, and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop and bend that's extremely comfortable, while they also offer a 15mm rise to help accommodate a wide fit range. - FACT carbon construction offers an optimized blend of durability and light overall weight. - 15mm rise for additional rider fit range. - Shallow Bend Drop: 123mm Drop x 75mm Reach

Light weight, comfort, and strength: the new SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo combines the flat bar top shape of the beloved Contour SL bar with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128mm drop. The short 70mm reach has been a popular choice in recent years, as it allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar. - Updated distinctive Zipp cosmetics - Unidirectional carbon built for stiffness, comfort, and light weight - Flattened top shape with 3° backsweep for comfort - Variable radius drop for multiple hand positions and deeper movement into the drop. - Lifetime warranty

Flared Adventure and Gravel bar made of EC90 carbon composite - 10 degrees of flare (adds 68mm to bar width at tip of drops) - Ergonomic top section and size-specific shape to optimize strength, weight and ride feel - Maximum Contact Drop (MCD) shape for comfort and control - Internal routing for Di2 wiring - 205g @ 42cm (width measured center-to-center)

Flared Adventure and Gravel bar made of EC90 carbon composite - 16 degrees of flare (adds 68mm to bar width at tip of drops) - Each width of bar has a unique diameter and length ergonomic top section - Maximum Contact Drop (MCD) shape for comfort and control - Internal routing for Di2 wiring - 208g @ 42cm (width measured center-to-center)

The EC90 SLX is comprised of advanced carbon construction for Easton’s lightest road bar to-date. This handlebar features Easton’s new MCD shape technology for a unique ride quality and comfort. TaperWall technology and Intelligent Flexibility team up to deliver a perfectly tuned bar that weighs just 195-grams. Shimano, SRAM or Campagnolo levers can be positioned for a smooth transition on the tops and into the bend, with cables wrapped neatly in the bar’s designed recesses. - Bar weight: 195mm (42cm) - Width (center-to-center): 38cm, 40cm, 42cm, 44cm, 46cm - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 125mm - Materials: EC90 carbon

Whisky's all-carbon Spano Drop Handlebar is designed to give gravel and all-road riders the most natural hand positions anywhere on the bar. A multi-stage flare puts the hoods at an optimal angle for comfort while maximizing control through the drops. The bar's flat top promotes flex and offers relief from rough surfaces, and its 31.8 clamp diameter with 90mm width allows compatibility with bar-mounted accessories, including aero bars. - Available in five widths, measured center-to-center at the hoods: 40, 42, 44, 46, 48cm - Compound flare — 12 degrees at the hoods and 20 degrees through the drops - Drop/Reach: 100mm/68mm - 31.8mm clamp diameter Specifications: - Bar Top Style: Flat - Width Measurement: Center - Bar Clamp Diameter (mm): 31.8 - Accessory Mount Diameter: 31.8 - Bar Reach (mm): 68 - Material: Carbon - Clip-on Compatible: Yes - Bar Drop (mm): 100 - Flare: 20 - Defined Color: Black - Weight: 236 - Drop Bend Style: Compact

Contact points—those spots where our bodies meet our bikes—are crucial areas for comfort and control. Get it wrong, and even the best bikes can be miserable to ride. We developed the new Terra handlebar to be the paragon of comfort, control, and performance, with an optimized blend of carbon fiber and advanced construction techniques yielding exceptional ride comfort, precise handling, and class-leading strength at an impressively low weight. A shallow drop and moderate reach combine with a 12-degree flare for optimal all-terrain comfort and control. - Optimized blend of high modulus carbon fiber materials and advanced construction techniques yield a light and confident bar - Ergonomic top perch alleviates pressure on the hands - Bar flared 12 degrees at the drops for added stability - Bend: 103mm drop x 70mm reach

A high performance bar, ideal for smaller hands or for riders that spend the majority of their time climbing. An ergonomic top perch with smooth transitions alleviate pressure on hands and greatly improve comfort. - Bar Width (center-to-center): 36/38/40/42/44cm - Clamp Diameter: Oversized 31.8mm - Ergonomic top perch alleviates pressure on hands. - FACT carbon construction offers an optimized blend of durability and light weight. - Front of bar optimized for dual-cable routing. - Shallow Bend Drop: 123mm drop x 75mm reach - Shallow bend drop design. - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls. - Weight: 200g (42cm)

A flared gravel handlebar with IsoCore that reduces vibration by up to 20% for more comfort through any terrain. Bad to the bone. Smooth to the core. The GR Pro IsoCore Gravel Handlebar is a premium OCLV Carbon bar designed for gravel and adventure riders seeking more comfort, control, and confidence. IsoCore tech — an additive to the carbon layup, reduces up to 20% more vibration than other carbon bars. A compact 70mm reach, 120mm drop, and 15-degree flare gives ample wrist clearance and makes accessing controls easy. PRODUCT DETAILS - 15-degree flare allows for more control in the drops - OCLV Carbon with IsoCore continuous inner-laminar technology - Shorter 70mm reach and wider flare allows for confident handling and easy access to controls - IsoCore technology decreases vibration by up to 20% over traditional carbon bars - Hoods measure 6cm narrower than drops - Laser-etched brake lever position lines for spot-on control setup - Compatible with clip-on aero bars (max torque 13.5Nm) - Adventure Fit gives riders a wide flare and short reach for confident handling and easy access to controls

- Full UD carbon construction aero road handlebar - Flattened top section for aerodynamic advantage and enhanced comfort - Fully integrated internal cable routing - Compatible with all mechanical/hydraulic brake systems and mechanical/electronic shift systems - 270g weight in 420mm width - ISO-Road safety certified - Clamp Size: 31.8mm - Rise / Reach: 85mm - Upsweep / Drop: 130mm

Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters and brakes in both the hoods and drops. - Width (center-to-center): 40cm, 42cm, 44cm, 46cm (+68m at drops) - Flare: 16-degrees - 42cm: 220g - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 120mm - Materials: EC70 carbon

We took our lightest, most comfort-advanced bar – the EC90SLX – and used our second-tier carbon fiber for a more affordable package. The EC70 SL features the same top of the line MCD shape technology for easy position transferring; Taperwall to maintain stiffness while reducing weight; and Intelligent Flexibility for added vibration dampening comfort. It also features recesses for cables and comes in four lengths. The EC70 SL is the full race package deal. - Bar weight: 220g (42cm) - Width (center-to-center): 40cm, 42cm, 44cm, 46cm - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 125mm - Materials: EC70 carbon

With its unidirectional carbon construction, the SL-K Compact handlebar is ready to race. It features the latest evolution of our compact bar shape, with a shallow 125mm drop and gentle flare. A wide center section gives ample room to mount accessories like GPS units or lights. The areas where the stem and levers clamp have additional reinforcement and a textured finish to avoid slip. - Aerodynamic Integrated Cable Routing (ACR) compatible - Semi-integrated Cable Routing (SCR) compatible - Continuous UD carbon Monocoque construction - Reinforced and textured clamping areas - 120mm wide round center section makes it easy to mount accessories - New internal cable routing options for Di2 - Bar Clamp Diameter: 31.8mm - Bar Reach: 80mm - Cable Routing: Internal - Bar Drop: 125mm - Flare: 4

Woodchipper is Salsa’s signature drop bar for off road riding, where its unique shape delivers comfort and control no matter how rough the terrain. Woodchipper Bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop. The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25° downward angle of the drops. - Unidirectional carbon fiber construction with new carbon layup to better accommodate clamping forces of modern controls - Ergonomic design works well with integrated road shift/brake levers or bar end shifters - 114mm drop, 56mm reach, 25° flare angle, 38° drop angle - Available in 42, 44, and 46cm widths - 31.8mm clamp diameter with 140mm width for use with Salsa Anything Cradle and aerobars

Cowbell Carbon blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell Carbon bars feature a 12-degree flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops. - Unidirectional carbon fiber construction with new carbon layup to better accommodate the clamping forces of modern controls - Drop/Reach: 115/68 mm - 31.8 mm-diameter stem clamp area is 140 mm wide for use with Salsa EXP Series Anything Cradle and aerobars - 12-degree flare and drop angles - Textured clamp areas for controls and stem

Cowchipper Carbon provides comfort, control, and efficiency on adventures that range from harsh gravel roads to technical mountain passes. While the Cowchipper resembles a traditional road bar, its 24-degree flare dramatically improves leverage, stability, and comfort when riding in the drops. - Unidirectional carbon fiber construction with new carbon layup to better accommodate the clamping forces of modern controls - 116 mm drop - 68 mm reach - 24-degree flare angle - 12-degree drop angle - 31.8 mm clamp diameter with 120 mm width for use with Salsa Anything Cradle and aerobars

An OCLV Carbon road bike handlebar with an ergonomic and aerodynamic shape. FULL SPEED FORWARD The Bontrager Aero Pro Road Handlebar is built upon our Race Fit, with a shorter reach and hoods that are 3cm narrower than the drops. This moves you into a more comfortable, ergonomic riding position that greatly reduces rider drag for an e/tra aerodynamic advantage. A 7.5-degree flare allows for ample wrist clearance and control, so you don't lose any power or comfort in e/plosive sprinting moments. PRODUCT DETAILS - OCLV Carbon construction is ultra-light, compliant, and durable - Ergonomic backsweep reduces rider drag for e/tra aerodynamic speed and comfort - Hoods measure 3cm narrower than drops - 7.5-degree flare provides ample wrist clearance for sprinting - Brake lever position guides for spot-on control set-up - Race Fit puts riders into a more comfortable ergonomic riding position

Engineered for endurance riding, the ultralight Contact SL D-Fuse handlebar offers compliance and ergonomic fit for the most demanding conditions. FEATURES: - Proprietary D-Fuse shaping on the tops for compliance and lightweight. - 8-degree flare in the shallow drops puts the hand and wrist in a comfortable and efficient position. - Compatible with Contact SLR and SL Aero and AeroLight stems for full internal cable routing. - Ergonomically shaped contact points fit the hand and palm from various angles, alleviating fatigue and numbness that can occur over long miles. - Ultra-light aluminum for optimal stiffness at a lightweight. - 38% more compliant and 16 grams lighter than the previous Contact SL D-Fuse handlebar. SPECIFICATIONS - Weight: 264g (420mm) - Bar Clamp Diameter: 31.8mm - Width: 400/420/440mm - Reach: 125mm - Drop: 72mm - Rise: 0° - Backsweep: 0° - Outsweep: 0° - Flare: 8° - Material: Alloy

For the ultimate in comfort and control over long distances, our all-carbon Scully Bar pairs a 5-degree upsweep with a 23-degree backsweep. Featuring an elegant forward bend before sweeping back again, its easy, natural hand position inspires confidence. It’s also blissfully wide, offering loads of real estate up top for mounting lights, bags, bikepacking gear, and more. ISO tested for harsh terrain, the Scully Bar is a sleek and stiff upgrade for paved commutes and whatever off-road riding you’re into — gravel, XC, singletrack, and beyond. Offered with 20mm of rise in two trimmable widths, the ideal fit is out there.

The bar offers the same compact reach and drop dimensions as the Service Course SL-70 but adds a flattened top section for a natural ergonomic grip on the bar tops and a revised ramp angle for proper fit. The SL-70 Ergo's specially tuned drop shape creates comfortable hand positions with the short reach to control levers vital for race situations. The bar's 128mm drop help puts the rider low and in control without compromising comfort. Whether it's a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Lifetime warranty

The randonneur inspired Ritchey Beacon WCS has a super-wide 36° drop flare with offers comfort and stability and plenty of space for handlebar packs. The Beacon's shallow 80mm drop and a shorter than usual reach offers broad support for your hands, and it has a gentle backward sweep for a more natural hand position when riding the tops. The WCS Beacon has Di2 cable routing and is constructed of triple-butted 7050 alloy for longevity and light weight. - Di2 Cable Compatible - 36 degree flair with 2 degree flair out at the ends; 4.5 degree back sweep

The ergonomic evolution of Ritchey handlebars continues with the ground-breaking WCS Beacon. The most notable feature is its super-wide 36° drop flare. Aside from the unmatched ergonomic comfort and stability afforded by this wide flare, it also allows for plenty of space for handlebar packs. When riding in the drops, the Beacon doubles down on comfort with a very shallow 80mm drop and a shorter-than-usual reach. The Evo-style top section offers broad support for your hands, and it has a gentle backward sweep for a more natural hand position when riding the tops. The unconventional aesthetic of the WCS Beacon belies its comfort and practicality. Taking inspiration from the randonneur world, the Beacon allows an easy transition of the hands around the bar without upsetting bike handling when loaded with gear. The gentle change of hand position allows the body to stretch and move while keeping the bike stable. Ideal for adventure touring and bikepacking on asphalt or gravel trails—or even for urban riding—the unique WCS Beacon brings a whole new level of comfort and control. - Material: triple-butted 7050 alloy - Bend style: bio-bend - Top style: ergonomic - Drop: 80mm - Reach: 65mm - Drop flare: 36° - Flare out: 6° - Backsweep: 4.5° - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Compatible with Shimano EW-RS910 junction box - Clip-on compatibility: yes - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible - Weight: 270g (42cm)

This unique bar has proven highly sought after by legions of gravel lovers and road riders since it was introduced a few years ago. Its wide drop flare offers adventurous riders an increased level of control and confidence compared to more traditional drop bars, while its shallow drop and short reach offer a welcome amount of comfort for endless days in the rough stuff. The Butano capitalizes on its original comfort by adding new features such as the ability for internal cable routing and a welcoming ergo-aero top section for increased hand support. The drop flare on the new Butano has also gone wider, measuring a liberal 18° for additional comfort and control.

Ritchey WCS components have been raced to victory by everyone from World Tour pros to cat 6 commuters. Butano is a short and shallow compact flared drop bar. - 7001 alloy - Clip-on compatible

The evolution of Ritchey handlebars continues with the WCS ErgoMax. This new bar enjoys a rich history of handlebar design and development and combines it with the modern demands of discerning riders who enjoy riding varying surfaces. Designed to enhance control and comfort when riding along loose surfaces, the ErgoMax is ideal for a gravel bike since it places the hands in a wider, more stable position while in the drops. The ErgoMax is just as perfectly situated on road bikes that are built for endurance, its ergonomics delivering unparalleled comfort. The bar tops employ a 10mm rise at the clamping area, which offers a slightly more upright riding position. They are then ovalized and have a slight 4-degree rearward sweep to more evenly distribute the weight of the rider's hands and wrists, also putting them in a more natural position. Continuing with an eye towards ergonomics, the ErgoMax also features drops with a nice, 12-degree flare to keep the rider's hands in a comfortable and confident position, while also adding a bit more unobstructed stability when turning or sprinting. The new Ritchey ErgoMax bar delivers more control, welcome comfort, and increased confidence when riding gravel, setting out on multi-day adventures, or rolling along those long miles of tarmac. - Material: triple-butted 7050 alloy - Bend style: compact - Top style: flat - Drop: 128mm - Reach: 73mm - Drop flare: 12° - Flare out: 3° - Backsweep: 5° - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible - Clip-on compatibility: no - Other features: C260 not compatible - Weight: 270g (42cm)

WCS VentureMax Drop Handlebar - Evo sweep of 6 degrees - 24 degrees of flare - Ergo Bio-bend - Compatible with all hood types

Ritchey WCS VentureMax XL 52cm wide appeals to bikepackers with a 24-degree drop flare and comfortable reach/drop.. - Broad 52cm width offers plenty of space for mounting accessories and bags - The flattened 38x22.5mm top section provides a comfortable area for resting hands - Width is measured at the initial bend rather than at the hood

Zipp Service Course SL 80 Ergo handlebar is all about making you faster in style and comfort. The bar offers an 80mm reach and 125mm drop, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. This bar has a flattened top and 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course SL 80 Ergo is our first ergo bar to be clip-on compatible. Made of 7050 aluminum, the Service Course SL 80 Ergo weighs 275g for a 42cm-wide bar. Light weight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 80mm reach and 125mm drop for a medium-high position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Di2 RS910 junction compatible - Lifetime warranty

- Award-winning Vibrocore foam core provides vibration-damping, proven to reduce arm pump and hand-numbness - 25° aggressively flared, wide drop bar for true off-road performance and comfort - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding in a more upright, balanced stance - 8mm bar clamp extends through the top section, providing enhanced hand support and comfort without multiple wraps of tape to increase diameter - Round profile upper section facilitates a wide range of rider/hand positions and maximizes grip on the bars in rough terrain - Recommended for: ASTM 3, Gravel Features: - Key Technologies: Vibrocore, On-Off Road Geometry - Material: Zirconium Doped 7-Series Alloy - Width, Hood to Hood (c-c): 420 / 440 / 460 / 480 / 500 / 520mm - Width, Barend to Barend (o-o): 562 / 582 / 602 / 622 / 642 / 662mm - Weight (g): 345 / 350 / 355 / 370 / 375 / 380 - Drop/Reach: 110mm / 65mm (all sizes) - Flare: 25° - Ramp: 14°

The Surly Corner Bar is for off-road riders who want to give drop bars a try without swapping out the drivetrain and brake levers on their current mountain setup. Does that make it an economical option for fresh excitement on the trail? Yes, it does. - Chromoly steel with custom-butted tubing - 22.2mm grip diameter - 25.4mm clamp diameter - One set of 25.4/31.8 x 60mm Problem Solvers shims included

We threw in a bit of everything for our take on the ultimate gravel handlebar setup. Rise, sweep, and flare make for an ultra-comfortable handlebar that keeps you in control no matter the terrain. Add the Cruise Control Top and Drop Grips and our Really Long Bar Tape to get to next-level comfort and performance. For the rider that wants to go everywhere, the Kitchen Sink Handlebar is the bar that has everything. With widths from 44 cm up to 50 cm, it's clear we believe in wide. But the added stability and control of a wider bar should not come at the cost of comfort. So we've thrown everything into this handlebar: - 20mm RISE means less pressure on the hands and a broad range of fit options. - 7° SWEEP means the bar is positioned where your hands want to be, whether you're on the flats, the hoods or the drops. - 25° FLARE on a compact drop means a stable, aerodynamic drop position that is actually comfortable enough to use. - Optional endurance loop adds an alternative aerodynamic riding position and a perfect spot for gear storage and mounting accessories.

The Service Course SL-70 is the bike fitter's go-to bar. The short reach to the hoods allows a proper fit without compromising stem length and steering control. With the revised ramp angle, proper fit is now achievable on even the most challenging setups. The 70mm reach is the shortest of Zipp's Service Course bars. Together with its 128mm drop, the bar is deal for riders preferring a low body position. Whether it's a rider with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Matte Black nano blast aluminum - Clip-on Compatible - Lifetime warranty

The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods, or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is clip-on compatible. Forged from lightweight 7075 aluminum. - Distinctive Zipp cosmetics - 7050 Aluminum - 80mm reach/125mm drop designed to fit a large number of riders - Clip-on compatible - Lifetime warranty

COMPACT, LIGHT & COMFORTABLE Inheriting many of the benefits from the flagship Contact SLR model, the all-new Contact SL road handlebar, is the go-to bar for riders seeking a lightweight but stiff and vertically compliant aluminum bar with compact geometry. Featuring all-new ergonomic shaping, the Contact SL handlebar also offers increased comfort for all day rides. FEATURES - Giant’s advanced alloy manufacturing process reduces weight by 20% when compared with previous versions, dropping from 290g to 230g for the 400mm width model. - Short reach and shallow drop for instant transition among the tops, hoods and the drops - A wider, curved top section adds vertical compliance and delivers a smooth ride - Purpose-designed ergonomic shaping of the top of the bar provides maximum hand comfort and support for long rides

A gravel handlebar with a wider flare that gives riders more comfort and control through any terrain. A smoother ride for rougher roads The GR Elite IsoZone Gravel Handlebar is a light alloy bar designed for gravel and adventure riders looking for more comfort, control, and confidence. IsoZone EVA pads deliver entire-ride comfort, while the bar's compact 68mm reach, 119mm drop, and 15-degree flare make it easy to access brake levers and shifting controls from all riding positions. PRODUCT DETAILS - 15-degree flare allows for more control in the drops - Custom-butted, lightweight 6066-T6 alloy construction - Shorter 68mm reach and wider flare allows for confident handling and easy access to controls - Replaceable IsoZone EVA pads (included) add comfort while maintaining original grip diameter - Hoods measure 6cm narrower than drops - Laser-etched brake lever position lines for spot-on control setup - Compatible with clip-on aero bars - Adventure Fit gives riders a wide flare and short reach for confident handling and easy access to controls

An ultra-high performance handlebar constructed to ride the most punishing conditions. The PRO Vibe Alloy handlebar is built to meet cycling’s highest demands using state of the art technology. The Vibe Alloy is developed with Di2 in mind offering ultimate integration for maximum aerodynamic performance and ultra-clean styling.